This page explains how to install DC/OS 1.9 using the Azure Resource Manager templates.

TIP: To get support on Azure Marketplace-related questions, join the Azure Marketplace Slack community.

Important: Upgrades are not supported with this installation method.

System requirements


To use all of the services offered in DC/OS, you should choose at least five Mesos Agents using Standard_D2 Virtual Machines, which is the default size in the DC/OS Azure Marketplace offering.

Selecting smaller-sized VMs is not recommended, and selecting fewer VMs will likely cause certain resource-intensive services such as distributed datastores not to work properly (from installation issues to operational limitations).


You will need an active Azure subscription to install DC/OS via the Azure Marketplace.

Also, to access nodes in the DC/OS cluster you will need ssh installed and configured.

Install DC/OS

Step 1: Deploying the template

To install DC/OS 1.9 on Azure, use the Azure Resource Manager templates provided.

Step 2: Accessing DC/OS

Because of security considerations, the DC/OS cluster in Azure is locked down by default. You must use an ssh tunnel to access the DC/OS Dashboard.

First, look up MASTERFQDN in the outputs of the deployment. To find that, click on the link under Last deployment (which is 4/15/2016 (Succeeded) here) and you should see this:

Deployment history

Click on the latest deployment and copy the value of MASTERFQDN in the Outputs section:

Deployment output

Use the value of MASTERFQDN you found in the Outputs section in the previous step and paste it in the following command:

ssh azureuser@$MASTERFQDN -p 2200 -L 8000:localhost:80

For example, in my case:

ssh -p 2200 -L 8000:localhost:80

Now you can visit http://localhost:8000 on your local machine and view the DC/OS Dashboard.

DC/OS dashboard


Some caveats around SSH access:

  • For connections to http://localhost:8000 to work, the SSH command must be run on your local machine, and not inside a Virtual Machine.
  • In the example above, port 8000 is assumed to be available on your local machine.
  • The SSH commands shown only work on Mac or Linux. For Windows use Putty with a similar port-forwarding configuration, see also How to Use SSH with Windows on Azure.
  • If you want to learn more about SSH key generation check out this GitHub tutorial.

The DC/OS UI will not show the correct IP address or CLI install commands when connected by using an SSH tunnel.

Note that the following commands can be used to run the DC/OS CLI directly on the master node:

# Connect to master node with ssh
ssh -p2200 azureuser@$MASTERFQDN -L 8000:localhost:80

# Install CLI on the master node and configure with http://localhost
curl -o dcos && 
sudo mv dcos /usr/local/bin && 
sudo chmod +x /usr/local/bin/dcos && 
dcos config set core.dcos_url http://localhost && 

# Now you can use the DC/OS CLI:
dcos package search

Tear Down the DC/OS cluster

If you’ve created a new resource group in the deployment step, it is as easy as this to tear down the cluster and release all of the resources: just delete the resource group. If you have deployed the cluster into an existing resource group, you’ll need to identify all resources that belong to the DC/OS cluster and manually delete them.

Next steps